Evaluation of Sexual Dimorphism Using Dental Dimensions - An Observational Study.

Aim: In our study, we evaluated the gender dimorphism among dental measurements of selected people in a South Indian district. Methodology: In our research, 500 participants between 17 and 25 years of age were included after taking their maxillary arch impressions. Utilizing Korkhaus compass and digital caliper, depth of palatal area as well as maxillary arch as a whole was done. T-test was done to initiate the comparative analysis between the palatal arch and complete maxillary arch depths where P < 0.05 was denoted significant statistically. Results: It was recorded that complete maxillary arch depth measurements were increased in case of men as compared to women, whereas the measurements related to depth of the palatal arch were not statistically significant. Conclusion: In our research, we found that complete maxillary arch depth can be utilized for gender segregation accompanied with other auxiliary methods. The mean value for both these measurements can be utilized as a standard measurement for advance research.

A novel conservative technique to allow oral opening and overcome rigor mortis during medicolegal autopsy.

This study presents a novel conservative technique to increase oral opening and overcome rigor mortis during medicolegal autopsy (MLA). The method proposes a myotomy of the temporalis and masseter muscles, taking advantage of the incisions of the cranial opening procedures, to achieve a significant oral opening (≥ 30 mm) in fresh cadavers with established rigor mortis without altering facial aesthetics. The study was performed on 48 individuals aged between 18 and 66 years (20 males and 28 females) who were autopsied at the Instituto Nacional de Patología Forense Dr. Sergio Sarita Valdez (Santo Domingo, Dominican Republic). The proposed technique not only allowed the oral access to all autopsied cadavers but also complied with current ethical standards for preserving facial aesthetics, taking into account the concerns of family members by allowing respectful viewing of the cadaver. This advancement not only contributes to the efficiency of oral autopsies but also influences public perception of forensic procedures and highlights the importance of ethical and aesthetic considerations in the context of MLAs. The proposed technique represents a significant step towards more respectful and ethical forensic practices, and offers practical advantages for a more complete and accurate assessment during MLA.

Applicability of Cameriere's third molar maturity index on orthopantomograms and computed tomography scans from a French population.

Cameriere developed a method on orthopantomograms (OPG) to assess adult age of 18 years based on the relationship between age and the third molar maturity index I3M. The aim of this study was to evaluate whether Cameriere's method could be applied to computed-tomography scans (CT-scans) from a population of French juveniles and young adults and compare the results obtained from OPG of the same individuals. Our sample comprised 200 examinations that had been performed at the radiological department of a French University hospital between 2007 and 2020. Each patient had received an OPG and a cranial CT scan for medical purposes, and we used a similar adaptation of I3M based on OPG to determine the I3M based on CT scans. Due to exclusion criteria, our final sample comprised 71 OPGs and 63 CT scans. Based on the 71 OPGs, there was concordance between chronological age and estimated age, with a sensitivity of 78.57%, a specificity of 89.47%, and a misclassified rate of 18.03% based on tooth 38, and a sensitivity of 78.79%, a specificity of 91.67%, and a misclassified rate of 17.78% based on tooth 48. Our results based on CT scans presented concordance between chronological age and estimated age for tooth 38 described by a sensitivity of 77.78%, a specificity of 94.12%, and a misclassified rate of 16.98%. The concordance between chronological age and estimated age based on 48 had a sensitivity of 75.00%, a specificity of 93.75%, and a misclassified rate of 19.23%. The > 90% ICC indicate an excellent similarity between measurements of teeth 38 and 48 based on OPGs and CT scans. This study has revealed the applicability of the Cameriere's method to calculate the I3M based on CT scans from a French population. The results based on CT scans are similar to results based on OPGs from the same individuals.

Allied Dental Students' Perceived Knowledge, Confidence, and Attitudes Regarding Disaster Victim Identification Topics.

Purpose Disaster victim identification (DVI) service requires knowledge, confidence, and an attitude (KCA) of readiness. The purpose of this study was to assess allied dental students' perceived KCA regarding DVI skills and topics.Methods A convenience sample of senior dental hygiene students (n=27) and senior dental assistant students (n=14) were recruited by email then presented mismatched simulated antemortem (AM) and postmortem (PM) bitewing radiographs and asked to indicate correct matches. Collectively, participants made 205 radiographic matches and indicated 205 degrees of certainty binarily as "positive" or "possible" (one per match). Participants also completed a researcher designed pretest/posttest electronic survey with seven 3-point Likert-scale items with answer options of "slightly", "moderately", or "extremely" regarding self-perceived knowledge. Statistical analyses were conducted with R software using an α=0.05 significance level.Results A total of n=41 students participated, yielding a response rate of 85.4%. A one-sided linear trend test revealed statistically significant increases of perceived confidence in knowledge from pretest to posttest regarding forensic odontologists' role in DVI (p<0.0001), DVI applications for mass fatality incidents (MFI) (p<0.0001), role of dental radiology in DVI (p<0.0001), and dental morphology applications for DVI (p<0.0001). Participants indicated moderate or extreme confidence in personal clinical skillsets to assist forensic odontologists with DVI. A one-sided Fisher's exact test revealed a statistically significant (p<0.05) positive association between expressed degree of certainty (confidence) and correct radiographic matches. A one-sided linear trend test revealed statistically significant (p<0.0001) improvements in attitude regarding participants' perceived importance for their respective professions to volunteer in DVI.Conclusion Participants of this study reported significant improvements of self-perceived KCA regarding DVI skills and topics. These characteristics may encourage allied dental professionals to pursue further DVI educational opportunities and future service when support is needed for MFI.

Gender Identification by Fingerprint Pattern and Salivary Blood Group Antigen Expression: A Forensic Approach.

Introduction Fingerprints found at the crime scene are important and valuable evidence, as they are unique to every individual. Determining the blood group from the blood samples obtained at the site of the crime helps in identifying a person. However, where blood stains are not available, saliva obtained at the crime site can be used to identify the victim. Since fingerprint patterns and blood groups are unique to every individual and remain unchanged throughout life, the correlation between dermatoglyphics and blood groups can be of use in victim identification. Objectives The present study is conducted with the objective of finding out if there is any association between the distribution of fingerprint patterns and blood groups and if this association is of use in gender identification. Materials and method Fingerprint patterns were determined in 200 (females: n = 152, males: n = 48) dental undergraduate students in the age range of 18 to 24 years. ABO blood grouping was done on saliva by using the absorption-elution method. To determine the accuracy of ABO blood group determination using saliva, it was correlated with the ABO blood grouping in blood.  Observations and result The most common fingerprint pattern was found to be loops (87, 43.50%), followed by whorls (81, 40.50%) and arches (32, 16.00%). The most common blood group was B (68, 34%), followed by O (46, 23%) and A (42, 21%), and the least common was AB (12, 6%). A higher percentage of secretors in saliva was observed in females (130, 86%) than males (38, 79%). The correlation of gender with blood group and fingerprint pattern showed that in males, the most common blood group was B (20, 42%), and the most common fingerprint pattern was whorls (21, 44%). In females, the most common blood group was B (48, 32%), while the most common fingerprint pattern was loop (68, 45%). Conclusion Present study reports an association between blood group and dermatoglyphics, which may help in gender identification. Saliva can be used as a helpful tool in victim identification in cases where blood stains are not available.

Detection of ABO Blood Groups From Dentin and Pulp by Using the Absorption-Elution Technique: A Forensic Cross-Sectional Study Among the Population of the Al Jouf Province, Saudi Arabia.

Background and objective Human teeth have a significant forensic importance. As they are the hardest of all human tissues, they are not just chemically stable but also their characteristics are maintained for a long time after death even in the most harsh environmental conditions. Despite the advances made in DNA analysis, fingerprinting, etc., ABO blood grouping still plays a significant role in the forensic practice in the field of personal identification, paternity disputes, and several other scenarios including the identification of mass disaster victims. The term blood groups refers to inherited antigens on the surface of red blood cells (RBCs) detected by specific antibodies. Since tooth pulp contains numerous blood vessels, blood group antigens are most certainly bound to be present in tooth pulp. Various studies have shown that blood group antigens in the pulp and dentin are preserved as long as up to two years after the demise of an individual. Absorption-elution technique has been proven to be the most sensitive, reliable, and consistent method to determine the ABO blood group from both the pulp and dentine. This study aimed to ascertain the ABO blood group from both the hard (dentin) as well as the soft tissue (pulp) of the tooth by using the absorption-elution (AE) technique and also to determine if there are any variations in identifying the blood groups from the teeth based on age and gender. Material and methods After obtaining due consent, we included patients of both genders aged between 16-60 years visiting the outpatient department (OPD) clinics at the College of Dentistry for periodontal or orthodontic extractions. One patient's blood type was determined by using the slide agglutination technique before any capillary blood extraction was performed; this patient served as a control. For this investigation, we used the pulp and powdered dentin samples taken from the dental extractions to test for the presence of ABO and Rhesus (Rh) factor antigens by using the AE method. The study samples were compared with the control for blood group determination. Statistical analysis was carried out using the chi-square test with Monte Carlo (MC) simulation to check for any correlation of blood grouping with age and gender. Results The dentin and pulp were shown to have positive blood group antigens for the ABO and Rh factors. While neither pulp nor dentin performed significantly differently in identifying the blood group antigens, pulp showed marginally higher accuracy. There was no discernible difference regarding gender or age in the dentin or pulp of any of the 45 samples studied. Conclusions For determining an individual's blood type and Rh factor, both the hard (dentin) and soft (pulp) tissues of a tooth are valid sources. This is particularly helpful in forensic medicine cases where teeth are the only remains that can be viably used to find out a person's identity.

Dental color measurement to estimate age in adults: a systematic review and meta-analysis.

Age estimation is a major challenge in anthropology and forensic odontology laboratories, as well as in judicial settings, as one of the tools used in human identification. The aim of this study was to evaluate the usefulness of age estimation methods based on the accurate measurement of tooth color changes. A systematic review was carried out following the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses and in compliance with Cochrane criteria recommendations (PROSPERO registration number CRD 42022343371). An electronic search was performed in the following databases: Pubmed, Web of Science, Medline, Current Contents Connect, SciELO, KCI-Korean Journal Database, Derwent Innovations Index and Russian Citation Index. The search strategy yielded a total of 18 articles. A randomized meta-analysis model of the results for the CIE L*a*b* color variables stratified by age (less than 30 years, 30-60 years, 60 years and older) was performed with 9 of the 18 studies included in this systematic review. According to our results, sex and location of color measurement are the most influential factors in color estimation. All studies were carried out in healthy anterior teeth by spectrophotometry as the most commonly used method for color measurement, with CIE L*a*b* being the most commonly analyzed parameters. Studies based on age as a dependent variable showed R2 values between 0.28 and 0.56, being higher in ex vivo teeth. Studies based on age as an independent variable showed R2 values ranging from 0.10 to 0.48. The random model showed high heterogeneity for the L*, a* and b* parameters in all age groups, which is explained by discrepancies in age range and non-standardized conditions for color measurement. This systematic review highlights the need to protocolize age estimation studies that measure tooth color, in order to apply this method in different forensic settings.

The effect of burning on dental tissue: A macroscopic and microscopic investigation.

Teeth are considered unique as fingerprints for identification purposes. Their structure and resilience mean they can remain for thousands and millions of years withstanding extreme conditions, including burning. During burning, bones undergo carbonization at approximately 400°C and calcination at approximately 700°C. This study aimed to investigate the effects of carbonization and calcination on dental tissue. It involved nondestructive analyses of 58 extracted human teeth before and after burning, using x-ray diffraction, micro-CT, and high-resolution confocal microscopy. The results revealed that during carbonization, dentin volume decreased in two thirds of the sample, accompanied by crack formation and significant reduction in hydroxyapatite crystal size (p<0.001). During calcination, dentin volume decreased in all teeth, along with a significant deepening of the cracks (p<0.001), while enamel crystal size increased slightly. Initial changes in teeth occurred at lower temperatures than had once been assumed, as indicated by the cracks during carbonization, and there was up to a 36% decrease in dentin volume during calcination, which should be considered when measuring burnt teeth. The results of this research provide new insight into understanding dental tissue response to burning. Thus, dental remains may contribute to the knowledge needed to reconstruct anthropological and forensic scenarios involving burning.

Role of Forensic Odontology in Identification of Persons: A Review Article.

Forensic dentistry plays a pivotal role in identifying deceased individuals when visual or other means of identification are not possible, particularly in the aftermath of mass disasters or criminal activities. Accurate and timely identification of the deceased and injured becomes crucial following events like earthquakes, fires, transport accidents, gunshot incidents, floods, tsunamis, bomb blasts, and terrorist attacks. The process of creating a person's identity is a formidable task, often relying on prevalent methods such as dental, DNA, and fingerprint analyses. Forensic odontology, a specialized field within dentistry, assumes a significant role in identifying individuals in accidents, civil unrest, natural and mass disasters, and crimes related to genocide. In cases where natural teeth are absent, the marking or labeling of dentures becomes essential for personal identification. Teeth's resilience to destruction and decomposition makes dental identification feasible even under extreme conditions. The fundamental principle of forensic dentistry rests on the uniqueness of each individual's oral structure, emphasizing that no two mouths are identical, not even in the case of twins. The purpose of this review is to explore the role of forensic dentistry in identifying individuals through various methods such as denture labeling, cheiloscopy, radiographs, bite mark analysis, rugoscopy, salivary signature, age and sex estimation, dental DNA identification, individual characteristics, and denture marking. Based on detailed ante-mortem records from dental specialists, which are compared to postmortem data during investigations, forensic dentistry is a trustworthy technique for identifying deceased individuals and criminals.

Latin American Forensic Odontology: A Scoping Review of its Current Research and the Objective/Subjective Nature of its Studies

SUMMARY: The new paradigm in Forensic Sciences initiated by the entry of genetics (the current standard of legal evidence) and accentuated by recognized wrongful convictions derived from experts today in the eye of criticism, has highlighted the potential for bias and error in forensic disciplines when they depend on human interpretation and subjectivity, which has not been avoided by Forensic Odontology (FO). However, a subjective judgment is not necessarily wrong, so the refinement of processes, the development of standards, and robust research can contribute to the validity of interpretation to increase objectivity. Latin America (LATAM) has its own realities and needs, which have conditioned the priorities and objectives of FO research. A scoping review is presented to systematically map the investigation of LATAM researchers and identify the objective or subjective nature of their assessments. LATAM shows interesting productivity and intentions to adhere to international standards, with Brazil leading this research significantly, followed by Chile and Colombia, among others. However, there is a disproportionate approach in certain lines of research (dental age estimation), and needs to address other quantitative studies, and to improve the visibility of the LATAM FO research.

El nuevo paradigma en ciencias forenses iniciado por la entrada de la genética (el actual estándar de la evidencia jurídica), y acentuado por reconocidas condenas injustas derivadas de pericias hoy en el ojo de la crítica, ha destacado el potencial de sesgo y error que poseen algunas disciplinas forenses cuando dependen de la interpretación humana y la subjetividad, lo cual no ha sido ajeno a la odontología forense (OF). Sin embargo, un juicio subjetivo no necesariamente es erróneo, con lo que el refinamiento de procesos, el desarrollo de estándares y la investigación robusta pueden contribuir a validar esa interpretación para aumentar su objetividad. Latinoamérica (LATAM) posee realidades y necesidades propias que han condicionado las prioridades y objetivos de la investigación en OF. Se presenta una revisión con búsqueda sistemática para mapear sistemáticamente la investigación en OF realizada por investigadores latinoamericanos, así como identificar la naturaleza objetiva o subjetiva de sus evaluaciones. LATAM demuestra una productividad interesante e intenciones de adherirse a estándares internacionales, con Brasil liderando significativamente esta investigación, seguido por Chile y Colombia entre otros. Sin embargo, se observa un enfoque desproporcionado en ciertas líneas de investigación (estimación de edad dental particularmente), y necesidad tanto de abordar otros estudios cuantitativos como de mejorar la visibilidad de la investigación latinoamericana en OF.

Clinical comparative study on the accuracy of palatal rugae in models obtained by different impression materials and intraoral scanning.

OBJECTIVE: Palatal rugae are frequently used in the evaluation of tooth movement after treatment in orthodontics and as a stable region in superimposition. It is important to note that the impression method and material used to record the rugae region affect the accuracy of the impression. The aim of this study is to compare the accuracy of palatal rugae, in three-dimensional (3D) by employing both conventional and digital impression methods. MATERIALS AND METHODS: In this study, 22 patients (12 females, 10 males) mean age of 13.5 ± 1.7 years old were selected with complete permanent dentition. Three different impressions were taken from the maxillae of the patients: conventional impression using silicone rubber impression material, conventional impression using alginate impression material, and optical impression using an intraoral scanner. The impressions' digital data were analyzed by the GOM Inspect (Version 2018, Braunschweig, Germany), a 3D analysis software. The Root Mean Square (RMS) values of the total ruga region were evaluated in this software. The data were statistically analyzed using the Jamovi program. The Kruskal-Wallis test and Mann-Whitney U test were performed due to the non-normal distribution of the data. RESULTS: There is no statistically significant difference between the comparison points of the right and left rugae's medial and lateral points and total rugae regions' RMS values. Although there was no statistically significant difference, the total RMS values of alginate and digital scan measurements showed closer results than the RMS values of silicone and digital scan measurements. CONCLUSION: The study found that there was no statistically significant difference in the total RMS values of the ruga region between traditional and digital impression methods. CLINICAL RELEVANCE: The treatment period in orthodontics is long. Different impression materials and methods can be used for diagnostic, mid-treatment, and final impressions. For superimpositions and treatment and post-treatment palatal ruga evaluations, traditional and digital impression methods are clinically acceptable and can be used as alternatives to each other.

Three-dimensional surface area analyses of developing maxillary second premolar root apices for age estimation using CBCT images.

Three-dimensional surface area analyses of developing root apices for age estimation in children and young adults have shown promising results. The current study aimed to apply this three-dimensional method to develop a regression model for estimating age in Malaysian children aged 7 to 14 using developing maxillary second premolars. A training sample of 155 cone-beam computed tomography scans (83 Malays and 72 Chinese) was analysed, and the formula was subsequently validated on an independent sample of 92 cone-beam computed tomography scans (45 Malays and 47 Chinese). The results showed a strong correlation (r = 94 %) between the chronological age as a dependent variable and the predictor variables, including root surface area of the apex, sex, ethnicity, and root development status (open/closed apices). For this model, the predictor variables accounted for 88.4 % of the variation in age except sex and ethnicity. A mean absolute error value of 0.42 indicated that this model can be reliably used for Malaysian children. In conclusion, this study recognises the method of three-dimensional surface area analyses as a valuable tool for age estimation in forensic and clinical practice. Further studies are highly recommended to assess its effectiveness across different demographic groups.

Forensic odontology in disaster victim identification.

This paper reviews MFI's from a historical perspective commencing with DVI in the late 20th century. For this paper, this era, 1970-90s is designated as the early modern period. As DVI by DNA analysis is introduced into the process, in the beginning of the mid-1990s, or late modern period, a shift in ID modality usage is noted. A statistical analysis of the primary identification (ID) methods established that dental identification was the majority identifier, or gold standard, in the early modern era. Although primarily viewed from a United States (US) perspective, referenced international incidents parallel the incidents investigated by US authorities. The introduction of DNA demarcated the early from the late modern era. Through research, development, and application this highly discriminating ID method would effectively, surpass dental ID as the gold standard into the late modern era. DNA ID would eventually overcome early criticism regarding cost and time consumption. In the MFI's discussed, the discriminating accuracy of DNA, when referenced against the dental identifications, validated the reliability of dental ID. Errors will be significantly minimized through confirmatory reconciliation by more than one ID method. In conclusion despite increased usage of DNA, dental ID has not been eliminated and remains a major contributor to DVI. Dental ID continues to develop through increased application of advanced imaging technology. Despite DNA's rapid advancement and application to DVI, the multidisciplinary approach to scientific identification should remain in the near future. Therefore, comparative dental ID will remain an important and reliable contributor to DVI.

3D superimposition of human dentition contours in personal identification: A preliminary study.

The human permanent dentition has been commonly used for personal identification due to its uniqueness. Limited research, however, is conducted using 3D digital dental models. We propose to develop a new 3D superimposition method using the contours of human dentition and to further evaluate its feasibility. A total of 270 intraoral scan models were collected from 135 subjects. After a one-year interval, 52 subjects were chosen at random and the secondary intraoral scan models were obtained. The dentition contours of the first and secondary models were extracted to form a resource dataset and a test dataset. Through the application of the iterative nearest point (ICP) algorithm, the test dataset was registered with the resource dataset, and the root mean square error (RMSE) values of the point-to-point distances were calculated. 104 genuine pairs and 13,936 imposter pairs were generated, and in this study, the registration accuracy was 100%. The difference between mean RMSE values for the genuine pair (0.20 ± 0.06 mm) and the minimum RMSE value for the imposter pair (0.83 ± 0.06 mm) was significant in the maxillary arch (p < 0.05). Similarly, in the mandibular arch, the difference between mean RMSE values for the genuine pair (0.22 ± 0.07 mm) and the minimum RMSE value for the imposter pair (0.85 ± 0.08 mm) was significant (p < 0.05). The difference between the RMSE value for the genuine pair in the maxillary and the mandibular arch was significant (p < 0.05). This study indicated the feasibility of dentition contour-based model superimposition and could be considered for personal identification in the future.

A morphometric approach to morphology analysis of palatal rugae in sibling groups.

Recent advances in imaging technologies, such as intra-oral surface scanning, have rapidly generated large datasets of high-resolution three-dimensional (3D) sample reconstructions. These datasets contain a wealth of phenotypic information that can provide an understanding of morphological variation and evolution. The geometric morphometric method (GMM) with landmarks and the development of sliding and surface semilandmark techniques has greatly enhanced the quantification of shape. This study aimed to determine whether there are significant differences in 3D palatal rugae shape between siblings. Digital casts representing 25 pairs of full siblings from each group, male-male (MM), female-female (FF), and female-male (FM), were digitized and transferred to a GM system. The palatal rugae were determined, quantified, and visualized using GMM computational tools with MorphoJ software (University of Manchester). Principal component analysis (PCA) and canonical variates analysis (CVA) were employed to analyze palatal rugae shape variability and distinguish between sibling groups based on shape. Additionally, regression analysis examined the potential impact of shape on palatal rugae. The study revealed that the palatal rugae shape covered the first nine of the PCA by 71.3%. In addition, the size of the palatal rugae has a negligible impact on its shape. Whilst palatal rugae are known for their individuality, it is noteworthy that three palatal rugae (right first, right second, and left third) can differentiate sibling groups, which may be attributed to genetics. Therefore, it is suggested that palatal rugae morphology can serve as forensic identification for siblings.

Accuracy of Age Estimation Using Three Dental Age Estimation Methods in a Young, Large, and Multiethnic Patient Sample.

European countries have become host countries for migrants and unaccompanied minors. However, many migrants arrive without identity documents. Many methods exist to estimate age; among them, several methods using dental age have been proposed. Our objective was to evaluate the accuracy of biological age determination in a multiethnic sample using dental age estimated using three methods: Nolla, Demirjian, and the London Atlas. Orthopantomograms collected for 324 patients of various ethnicities aged from 4 to 20 years old were included. Then, for each orthopantomogram, a blind trained examiner used the three methods of age estimation. For each method, the estimated mean age was greater than the real mean age (p < 0.0001). The accuracy after 18 years old with a 1-year margin was under 50%. Demirjian's method gave a less accurate estimated age than Nolla's method (p < 0.0001) or the London Atlas (p < 0.001). The most accurate methods were those of Nolla and the London Atlas, with average absolute deviations of 1.3 and 1.2 years, respectively. Demirjian's method was much less accurate, with a deviation of around 2 years. The evaluated methods are unable to provide reliable information to determine if an individual is a minor.

Desarrollo de la Psicomotricidad en Estudiantes de Odontología Durante el Confinamiento por COVID-19

Las habilidades psicomotrices son un pilar fundamental del aprendizaje en odontología y clásicamente han sido trabajadas a través de la simulación o atención de pacientes. Durante el confinamiento debido a COVID-19, los estudiantes no tuvieron factibilidad de realizar procedimientos preclínicos. Debido a esto, se implementaron sesiones de entrenamiento de habilidades psicomotrices, en formato online, que permitieran preparar a los estudiantes durante el confinamiento para el retor no a la clínica. Se implementaron sesiones de entrenamiento psicomotriz a través de la utilización de materiales de artes plástica s e instrumental odontológico en formato online y guiados por una Terapeuta ocupacional. Para su medición, se realizó un estudio de casos y controles, donde los grupos se seleccionaron por conveniencia entre estudiantes que participaron de las sesiones y aquellos que tuvieron la formación virtual tradicional. La experiencia se evaluó a través cuestionario de autopercepción contestado por los estudiantes con respuestas en una escala de Likert y se comparó a través de pruebas estadísticas no paramétricas. Se recolectó una muestra total de 27 estudiantes, con una edad promedio de 23,7 años. Al comparar las respuestas de ambos grupos, los estudiantes del grupo casos percibieron significativamente una mejor sujeción de objetos pequeños utilizando pinzas, manipulación de instrumentales manuales y rotatorios de manera más precisa y mejor coordinación entre ambas manos durante un procedimiento simple en boca en comparación al grupo que no participó de las mismas. El entrenamiento de habilidades psicomotrices realizadas durante el periodo de confinamiento mostró resultados positivos en la percepción de las habilidades psicomotrices de los estudiantes, siendo una estrategia de bajo costo para ser implementada durante la formación de destrezas de los estudiantes de odontología en diferentes contextos. Sin embargo, para una mejor implementación debe estar en conjunto a estrategias de simulación para ser totalmente efectiva.

Psychomotor skills are a fundamental pillar of learning in dentistry and traditionally have been worked on through simulation or patient care. During the confinement due to COVID-19, students were not able to perform preclinical procedures. Due this, psychomotor skills training sessions were implemented, in online format to prepare students during confinement for the return to the patient care. Psychomotor training sessions were implemented using plastic arts materials and dental instruments in online format and guided by an occupational therapist. For its measurement, a case-control study was carried out, where the groups were selected by convenience between students who participated in the sessions and those who had traditional virtual training. The experience was evaluated through a self- perception questionnaire answered by the students with answers on a Likert scale and compared through non- parametric statistical tests. A total sample of 27 students was collected, with an average age of 23.7 years. When comparing the responses between groups, the students in the case group perceived significantly better grasping of small objects using forceps, more precise manipulation of hand and rotary instruments and better coordination between both hands during a simple mouth procedure compared to the group that did not participate in the same. The psychomotor skills training performed during the confinement period showed positive results in the perception of psychomotor skills of the students, being a low-cost strategy to be implemented during the skills training of dental students in different contexts. However, for a better implementation it should be in conjunction with simulation strategies to be fully effective.

Estimation of Age implementing pulp tooth volume ratio in maxillary canines of an Indian population by means of CBCT scans.

BACKGROUND: Forensic odontology is a subfield of forensics that can assist in determining age, gender, and other demographic factors. OBJECTIVE: The focus of this research is to ascertain age by tooth volume ratio of permanent maxillary canines using a CBCT scan. METHODS: In this retrospective investigation, 1000 CBCT images were gathered and focused on only fully developed maxillary canines. For each of the maxillary canines, the researchers measured and calculated the volume of the pulp chamber, root canal, and entire tooth using the ITK Snap programme. The pulp volume to tooth volume ratio was computed. The equation AGE = 59.208 - (583.652 x pulp volume/tooth volume) was then used to compute age. The samples were divided into 5 age groups; 13-20, 21-30, 31-40, 41-50, and 51-60. The age was calculated for samples in each group and it was compared to the actual age. RESULTS: Between individuals' actual age and computed age, the study discovered a statistically significant positive association. While groups 3, 4, and 5 demonstrated positive but weaker correlations (r= 0.854, r= 0.658, and r= 0.612, respectively), groups 1 and 2 displayed statistically significant strong positive correlations (r= 0.987 and r= 0.923, respectively). The average total discrepancy between the age that was computed and the actual age was 2.45 1.344. CONCLUSION: The study found a statistically significant positive correlation between computed age and actual age, with the younger age groups 1 (13-20) and 2 (21-30) showing the strongest relationships. This underlines its potential success in court, particularly when dealing with young criminals.

Forensic odontology in DVI-A path forward.

Dental identification is a pillar of disaster victim identification (DVI). Dental identification is accurate, efficient, inexpensive, and accepted in courts of law. The (known) antemortem (AM) dental charts and radiographic images acquired from the dentist of the missing person are evaluated, processed, and compared to post mortem (PM) findings present in the dentition or fragments of the dentition of the deceased individual. These comparisons evaluate and assess individuating restorative dental work, dental anatomical areas of concordance, spatial relationships of teeth one to another, and occasionally calculate the degree of "uniqueness" of either or both of the AM and PM dentition compared to known population databases. In a multiple fatality incident, odontologists may utilize age stratification to assist other means of identification. Computer comparison algorithms using recorded data can indicate possible matches between AM and PM data sets. Following clinical assessment, collection of post mortem tooth specimens for DNA profiling generation may be undertaken. This paper will highlight modern and efficient use of these tools. The framework for how dental identification in these incidents is currently managed is presented. The authors propose a change to this approach that moves away from interpretive subjective assessment toward comparisons based largely on objective data. The aim of this paper is to highlight the benefits of minimizing subjective decisions and maximizing objective data in the dental DVI process while simultaneously reducing risk to clinical personnel and minimizing costs by reducing the number of clinicians required onsite.

Influence of the amount of saliva deposition and time elapsed after deposition on bite mark analysis.

Bite mark analysis is among the most interesting research fields in forensic odontology; however, it is limited by its dependence on the employed method as well as assessor subjectivity, particularly when using morphological analysis or DNA profiling. These limitations are due to differences in DNA collected from saliva adhering to a living or inanimate body, as well as differences in exocrine fluid secretion and deposition amount among individuals. This study aimed to analyze the effectiveness of DNA profiling when there are differences in the amount of saliva adhering to a living body and when time has elapsed since deposition. Most allele peaks could be identified in 1 µl of saliva, even 9 h after saliva deposition and examination. Consistent results were obtained following saliva deposition in an individual who had engaged in up to 9 h of free activity. The results of this study demonstrate the validity and reliability of DNA profiling for bite mark analysis and are extremely important as they can demonstrate the usefulness of the little information left by a suspect on a victim's body.